Hulkman jump starter-ийн алдааны код, шийдлүүдийн утга

Hulkman jump starter error codes and solutions can be frustrating, but with a little knowledge, you can get your jump starter up and running again in no time. Энэ нийтлэлд, we’ll go over the most common Hulkman jump starter error codes and what to do if you encounter one.

How to troubleshoot Hulkman jump starter error codes?

Hulkman jump starter error codes can be quite frustrating to troubleshoot. Гэсэн хэдий ч, with a little detective work, you can quickly identify and solve the issue. Here are some tips for troubleshooting Hulkman jump starter error codes:

1. Батерейны түвшинг шалгана уу. Make sure the battery is fully charged and that the jumper cables are connected properly.
2. Check the output voltage. If the output voltage is low, зай бүрэн цэнэглэгдсэн эсэхийг шалгана уу. If the voltage is still low, there may be a problem with the jump starter.
3. Check the output current. If the output current is low, зай бүрэн цэнэглэгдсэн эсэхийг шалгана уу. If the current is still low, there may be a problem with the jump starter.
4. Check the jump starter’s fuse. If the fuse is blown, the jump starter may not be able to start.
5. Check the jump starter’s circuit breaker. If the circuit breaker is tripped, the jump starter may not be able to start.
6. Check the jump starter’s ground. If the ground is not good, the jump starter may not be able to start.

Hulkman jump starter error code 1

HULKMAN products feature multiple advanced safety technologies, including reverse-polarity protection. It can detect a reverse attachment to your car battery automatically. If you reverse the polarity of the clamps, it will display the “Error Code 1/Error Code ” message as the above picture revealed.

If the screen shows “Error Code 1,” please follow these 3 steps:

1. Алхам 1: Take off and exchange the clamps. Recheck your car battery terminals: the red clamps connect to “+” and the black clamps to “-“;
2. Алхам 2: The screen will display the “READY” icon, following which you can go back to start your engine ignition.
3. Алхам 3: Машины батарейгаас хавчаарыг салгана.

Hulkman jump starter error code 2

1. Алхам 1: Зайны хавчаарыг үсрэх асаагуурт хийж, хавчаарыг машины аккумулятор руу холбоно (The screen may display “Error Code 2” or nothing).
2. Алхам 2: Эрчим хүчний гаралтыг эхлүүлэхийн тулд цахилгаан товч болон гар чийдэнгийн товчлуурыг 2-3 секундын турш зэрэг дарна уу.
3. Алхам 3: Машины хөдөлгүүрийг асаана уу.
4. Алхам 4: Машины батарейгаас хавчаарыг салгана.

Hulkman jump starter error code 3

Hulkman jump starter error code 4

If the screen shows ‘Error Code 4’, it means the jump starter has entered the Safe Mode automatically.

Please follow these 3 steps:

What to do if Hulkman jump starter error codes occur?

If you’re getting error codes on your Hulkman jump starter, it means there’s a problem with the unit. The above is what you can do to troubleshoot and fix the issue. If you’re still getting error codes after trying these tips, contact Hulkman customer service([email protected]) for further assistance.

What to do if Hulkman jump starter doesn’t work?

Хэрвээ чиний Hulkman үсрэлт эхлүүлэгч doesn’t seem to be working, Асуудлыг шийдвэрлэхийн тулд та хэд хэдэн зүйл хийж болно.

1. Эхлээд, check the battery connections. Make sure the battery is properly inserted into the jump starter and the positive and negative connectors are connected.
2. Дараачийн, try to charge the battery. Хэрэв зай бүрэн цэнэглэгдсэн бол, the jump starter may not be getting power from the battery.
3. Эцэст нь, check the cord. Make sure it is securely plugged into the jump starter and the outlet.

Төгсөв

Энэ нийтлэлийг уншсаны дараа, you should now have a better understanding of the meaning of Hulkman jump starter error codes. If you are ever faced with one of these error codes, you should now know how to interpret them and what steps you need to take in order to fix the problem.