Ноцо ГБ40 проблеми и њихова решења: Исправите да се не пуни, Кликање Шумови и више

Ноцо ГБ40 Проблеми: Ако имате проблема са својим Ноцо ГБ40 јумп стартером, постоји неколико решења која можете испробати. Проверите да ли је батерија правилно уметнута. Батерију треба поставити на дно јединице, а сребрни контакти на батерији треба да буду у линији са сребрним контактима на јединици.

Уобичајени проблеми са стартером НОЦО ГБ40

Тхе Ноцо гениус боост гб40 common problems includes the following list.

  1. Not Charging
  2. Not Working
  3. Clicking Noise
  4. Flashing Red & Green
  5. The chords on clamps are very short
  6. Lack of a wall charger for recharging
  7. Restricted to 12-volt lead-acid batteries
  8. Limited capacity and number of ports
  9. Only has 5V ports
  10. Jump-starts for less than six times
  11. Lights keep running

Not Charging and Solution

Not Charging: Ако се ваш Ноцо Гениус Боост ГБ40 не пуни, највероватнији разлог је или батерија или пуњач. Ако сте испробали различите пуњаче и батерије, онда проблем може бити у самом уређају.

Да поправим ово, remove any loose objects near the device or try pressing down on the speaker until it disappears. If you are hearing clicking noises from your Noco Genius Boost GB40, може бити да постоји нешто што омета говорника.

Not Working and Solution

Исправите да се не пуни: Ако се ваш Ноцо ГБ40 Гениус Боост не пуни правилно, покушајте да замените батерију. Ако то не реши проблем, то може бити због неисправног пуњача. У том случају, please reach out to our support team for a replacement charger.

Clicking Noise and Solution

Неки стартери стварају звукове кликтања када се пуне. То је обично зато што је батерија превише хладна или преврућа. Да бисте решили овај проблем, загрејте батерију пре него што покушате да је напуните. Алтернативно, покушајте да користите другу врсту пуњача за ваш стартер.

Flashing Red & Зелено и решење

If your NOCO GB40 is flashing red and green, постоји неколико ствари које можете да урадите да бисте покушали да решите проблем. Први, check the battery level and make sure it is charged. Ако је батерија празна, charge it for a few hours and then try again. Ако је батерија напуњена, try resetting the device by pressing and holding the power button for 10 секунди. If the GB40 still won’t stop flashing red and green, contact NOCO customer support for help.

The chords on clamps are very short

Your NOCO GB40 chords on clamps are very short, there are a few things you can do to fix the issue. Први, try to adjust the clamps so that they are not so tight. This will give the chords some slack and allow you to stretch them out a bit. Ако ово не успе, you can try using a wire cutter to cut the chords. Be sure to cut them as close to the clamps as possible so that you do not damage the clamps.

Lack of a wall charger for recharging

Because of your NOCO GB40 jump starter doesn’t come with a wall charger, you can use a USB cable to recharge it. Just connect the USB cable to the GB40 and then plug it into a USB power source. You can use a USB port on your computer or a USB power adapter.

It’s also important to make sure that the GB40 is properly connected to the power source. The red charging indicator light should be lit up when the GB40 is connected to a power source. If the red light is not lit, check the connections and make sure that the GB40 is properly plugged into the power source.

Once the GB40 is properly connected to a power source, the red charging indicator light will turn off when the GB40 is fully charged.

Restricted to 12-volt lead-acid batteries

Први, you’ll want to check the battery terminals to make sure that they are clean and free of corrosion. If the terminals are corroded, you can clean them with a wire brush or by using a solution of baking soda and water.

Следећи, you’ll want to check the connections between the charger and the battery. Make sure that the connections are tight and secure.

Коначно, you’ll want to check the charger itself to make sure that it is working properly. If the charger is not working properly, можда ћете морати да га замените.

Limited capacity and number of ports

Први, try resetting the device. Да уради ово, simply remove the battery and then reinsert it. This should reset the device and hopefully fix the issue.

Ако то не успе, then you may need to update the firmware on the device. You can do this by downloading the latest firmware from the NOCO website and then following the instructions on how to update the firmware.

If neither of those solutions work, then you may need to contact NOCO customer support for further assistance.

Only has 5V ports

Први, check to make sure that the charging cable is properly connected to the GB40. If the cable is loose or not properly connected, this could be the reason why the GB40 is only outputting 5V.

Следећи, try resetting the GB40 by disconnecting it from the power source and then reconnecting it. This sometimes helps to reset the unit and fix any issues that may be causing it to only output 5V.

Jump-starts for less than six times

Први, проверите батерију. Make sure that it is properly charged and that there are no loose connections.

If the battery seems to be fine, then the next step is to check the jump-start terminals. Make sure that they are clean and free of corrosion.

If the terminals are clean and the battery is charged, then the next step is to check the jumper cables. Make sure that they are the right size and that they are in good condition.

If the jumper cables are in good condition and the right size, then the next step is to check the engine. Make sure that there is no debris blocking the engine from starting.

If the engine is clear and the battery is charged, then the last step is to check the NOCO GB40 itself. Make sure that it is properly connected and that all of the settings are correct.

Lights keep running

Први, check the batteries. If the batteries are low, recharge them or replace them with new ones. If the batteries are not the problem, then the issue may be with the light itself. Try cleaning the light with a soft cloth and see if that helps. If the light is still not working properly, можда ћете морати да га замените.

ФАК

К1: Како да користим Ноцо Гениус Боост ГБ40?

К2: Колико дуго траје Ноцо ГБ40?

The NOCO GB40’s can last a very long time due to the cycle capabilities of the lithium battery, the key is to charge them once every 6 months if they are in storage.

К3: Да ли Ноцо ГБ40 пуни батерију?

да, the Noco GB40 will charge your battery. It is a battery charger and maintainer that is designed to keep your battery charged and in good condition.

К4: Како да напуним Гениус ГБ40?

Q5: Да ли Ноцо ГБ40 треба да буде потпуно напуњен?

да, when you get it, fully charge it before first using it to ensure optimal performance.

Q6: Могу ли оставити НОЦО боост плус гб40 укључен?

да, the NOCO GB40 has built in overcharge protection and can remain on a charging source at all times.

Q7: Како да знам да ли Ноцо гениус наплаћује?

Када се батерија пуни, the charge LED will be illuminated red. The charge LED will remain a solid Red color (not blinking) until the battery is fully charged. Када је батерија потпуно напуњена, the charge LED will be illuminated Green.

Q8: How do I reset a Noco GB40 Battery charger?

Постоји неколико различитих начина за ресетовање пуњача Ноцо ГБ40. Неки људи сматрају да то треба да ураде када њихов пуњач не пуни њихов уређај или када чују шкљоцање из пуњача.

Уклоните батерију и меморијску картицу из уређаја. Искључите пуњач на зиду. Уклоните батерију и меморијску картицу из уређаја. Држите притиснуто дугме за напајање за 3 секунди, затим извадите батерију и меморијску картицу. Поново инсталирајте и батерије и меморијску картицу. Поново прикључите пуњач у утичницу. Притисните и држите дугме за напајање за 3 секунди, онда га пустите.

Зелено светло на пуњачу би требало да се угаси после отприлике 10 секунди. Укључите уређај тако што ћете притиснути и држати дугме за напајање отприлике 5 секунди. Ако све друго не успе, можете покушати да ресетујете уређај тако што ћете држати оба дугмета истовремено притиснута 10 секунди.

Q9: How many mAh is the NOCO GB40?

The Noco GB40 genius BOOST gets 2150 mAh and 1000 А.

Закључак

Ако имате проблема са Ноцо ГБ40 уређајем, као што је звук који се не пуни или шкљоца, постоји неколико ствари које можете учинити да их поправите. If all of above solutions fail, можда је време да свој Ноцо ГБ40 однесете на поправку.