How To Use And Charge Dbpower djs50 jump starter?

Ang Dbpower djs50 jump starter (Check Price on Amazon.com) is a fantastic little stylish portable booster pack to recharge your 12-volt vehicle battery that works as a power bank too. Looking at it you can easily say that it looks like a more expensive, better-capacity portable power station and indeed it does, with added features many others do not offer. It’s great for boosting dead car batteries and as a portable charger for various devices like cellphones, tablets and other gadgets.

Jump Starter Kit Dbpower DJS50 Jump Starter

Alamin ang Higit pang Dbpower DJS50 Jump Starter

Dbpower djs50 jump starter

Ang Dbpower djs50 jump starter ay isa sa mga pinakamalakas na starter na maaari mong bilhin. Maaari itong magsimula ng mga engine hanggang sa 9 beses na may nito 12,000 mAh baterya. Habang ang Dbpower djs50 ay maliit at magaan ito ay may 12,000mAh na baterya na maaaring magsimula ng mga sasakyan na may hanggang sa 5L gas o 3L diesel engine.

Ang Dbpower djs50 jump starter ay dumating sa isang magandang kaso na may isang micro USB cable, mga cable ng jumper, at isang manwal ng gumagamit. Ang casing ay gawa sa plastic kaya walang mga metal parts na maaaring mag short out kapag kinokonekta ito sa baterya ng kotse. Dbpower djs50 ay may isang lubhang kapaki pakinabang na LCD screen na nagpapakita ng iba't ibang data tulad ng:

  • Porsyento ng baterya, Boltahe ng baterya
  • Katayuan ng pag charge, Uri ng pagsingil
  • Temperatura, Presyon ng hangin

Kasalukuyang Ang aparato ay mayroon ding mga tampok ng kaligtasan tulad ng:

  • Sobrang singil na proteksyon
  • Maikling circuit proteksyon
  • Reverse polarity proteksyon
  • Proteksyon sa overvoltage
  • Proteksyon sa labis na discharge

Preparation for use Dbpower djs50 jump starter

Upang simulan ang paggamit ng aparato na kailangan mo upang singilin ito. Bago mag charge, siguraduhin na ang kapangyarihan ay naka off at red indicator light ay kumikislap dahan dahan. Sa panahon ng pag charge, ang red indicator ay naka on at green indicator ay off.

Pagkatapos ng baterya ay ganap na sisingilin maaari mong gamitin ito upang simulan ang iyong kotse. Ang unang bagay na kailangan mong gawin ay upang matiyak na ang baterya ng iyong kotse ay ganap na patay. Kung hindi ito ay, wag mo na subukang mag jump start kasi baka masira ang battery at Dbpower djs50 jump starter. Kung okay lang ang lahat, patayin ang ignition at alisin ang mga susi mula sa pag-aapoy. Kumonekta sa positibo (pula) clamp of Dbpower djs50 jump starter to positive post of a car battery. Connect negative (itim) clamp to negative post of a car battery or any metal part of vehicle (not visible in photo, but handle of black clamp has special textured part that can be used for this purpose).

Make sure clamps are well connected – otherwise they may slip away when you try to start your car engine. Now it’s time to start your engine. Press power button on device body for 2 seconds and wait until green light will turn on. You can also browse the product information for the Everstart Jump Starters before making a decision.

Charging The DJS50 Jump Starter

Let me first explain the symbols that are on your Dbpower djs50 jump starter.

The Battery symbol is an indicator of the battery status. If there is just one solid light, ibig sabihin nito ay kasalukuyang naniningil. Kung may dalawang matibay na ilaw, ibig sabihin umabot na ito sa 100%. Ang simbolo ng kidlat ay nagpapahiwatig na maaari mong gamitin ito upang singilin ang iba pang mga aparato sa pamamagitan ng USB cable. Kapag iisa lang ang matibay na ilaw, ibig sabihin nito ay kasalukuyang naniningil. Kung may dalawang matibay na ilaw, ibig sabihin umabot na ito sa 100%. Ang simbolo ng kidlat ay nagpapahiwatig ng kakayahang singilin ang iba pang mga aparato sa pamamagitan ng USB cable.

Bago singilin ang Dbpower djs50 jump starter, Siguraduhing basahin nang mabuti ang lahat ng mga pag iingat at tagubilin sa kaligtasan. Nagcha charge ang jump starter May mga 2 mga paraan ng pag charge ng jump starter, gamit ang alinman sa AC charger o DC car charger. Kapag gumagamit ng AC charger, siguraduhing gamitin lamang ang supplied AC charger at ikonekta ito sa isang standard na sambahayan AC outlet. Huwag singilin o patakbuhin ang jump starter habang ito ay nasa isang sasakyan. Ang inirerekomendang ambient temperature range para sa pagpapatakbo at pagsingil ay -4°F (-20°C) sa 122°F (50°C).

Kung ang temperatura ng paligid ay nasa labas ng hanay na ito, payagan itong maabot sa loob ng hanay ng temperatura na ito bago singilin o patakbuhin ito. Ang LED status indicator ay mananatiling naiilawan RED sa panahon ng pag charge at maging GREEN kapag ganap na sinisingil. Sa ilalim ng normal na paggamit, ang isang kumpletong singil ay tumatagal ng tungkol sa 3-5 mga oras.

Using The DJS50 Jump Starter

Kumuha ng Higit pang mga DJS50 Jump Starter Mga Detalye

Alam natin na ang Dbpower djs50 jump starter ay isang power supply, so paano gamitin ito? Makikita natin na may dalawang input interface at isang output interface sa larawan. Ang pula ay input, at ang itim ay output. Gamitin ang charger ng kotse kapag nagcha charge! Ang pulang interface ay ipinasok sa kotse, at ang itim na interface ay ipinasok sa jump starter. Ito ay singilin ang iyong jump starter. We need to charge it for at least 6 hours before we can use it normally. You can only use it when you hear a beep sound after 6 hours of charging. The next step is how to use it?

  1. Connect the battery jump starter clamps to the vehicle battery terminals. Red clip on positive (+) and black clip on negative (-).
  2. Turn on the Dbpower djs50 jump starter by pressing the power switch button
  3. Once the unit is turned on, all lights will illuminate for 3 segundo. 4. Starter motor must not be cranked for more than
  4. seconds at a time. If engine does not start within 4 segundo, turn off ignition and wait 10 seconds before trying again (do not crank engine continuously).
  5. After the engine is started, disconnect jump starter in reverse order from attachment. Remove black clamp from negative (-) una na, then remove red clamp from positive (+).
  6. Wait at least 2 minutes before attempting to jump another vehicle or before recharging the unit.

Turning On Dbpower DJS50 Jump Starter

Before start:

  • Check the indicator light, and make sure the power is full.
  • Ensure the input voltage of your car matches the operating voltage of Dbpower djs50 jump starter.
  • Connecting the power cord with charger head to Dbpower djs50 jump starter, and then connect to a socket/charger (5V/1A).
  • The indicator light keeps red while charging and turns green after fully charged.

Turning Off Dbpower DJS50 Jump Starter

After you have the engine started, check to see if the engine is running normally. If the engine is running normally, turn off the Dbpower djs50 jump starter and remove the clamps. If a vehicle fails to start, wait several minutes before attempting to boost again.

To avoid jump-starting a dead battery, you should use a voltmeter or multimeter to check its voltage first. Connect the meter’s red lead to the positive terminal of the battery and its black lead to the negative terminal. If your meter shows a reading of 12.6 volts or more, then your battery has sufficient charge for starting your car. Otherwise, it will need some help from a jump starter. If your battery has low charge but not completely dead, you can recharge it using your car’s alternator by driving around for about 30 minutes or so. You can also recharge it using a charger that connects directly to its terminals.

Both methods are typically faster and easier than using a jump starter, although they may not be possible if you’re stranded on a highway with no other cars nearby, or at home without access to an alternate power source like an AC outlet.

Using The Power Bank Function

Click To See The Power Bank Features

1.Press the power switch for 3 seconds to start up, and the digital tube shows “0”, which means that there is no electricity; 2.When charging a mobile phone, press the power switch for 1 second to turn on the mobile phone interface, and connect with the data cable;3.When charging a tablet computer, press the power switch for 2 seconds to turn on the tablet computer interface, and connect with the data cable; 4.When charging a laptop computer, press the power switch for 3 seconds to turn on the laptop computer interface, and connect with the data cable; 5.Connect it to your car battery with its clamps in the right order (make sure that your car engine is off).

Mga Tip sa Kaligtasan Dbpower DJS50 Jump Starter

  • Always read the instruction manual carefully before starting to use the product.
  • Don’t allow children or people with disabilities to use this product without adult supervision.
  • Don’t use this product in a flammable area (such as gas station).
  • Keep this product away from heat source and direct sunlight exposure.
  • Don’t place this product in high temperature, high humidity, dust and corrosive environment.
  • Don’t touch the clamp with your hands when it is connected to a vehicle battery, otherwise it may cause sparks or other injuries if short circuit occurs between two clamps or two terminals of a battery.
  • If you notice smoke, burning smell or other strange odor/noises from the unit, immediately stop using it and contact this customer service hotline for help; otherwise it may cause fire, burn or other injuries and property damage.
  • Don’t put this product into water or any other liquid to prevent electric shock and fire hazard; never expose it under the rain or snow for long time to avoid short circuit or malfunction caused by moisture inside the unit or corrosion of internal component due to extended exposure under wet conditions.

Buod

Recently, we have introduced a new type of jump starter named Dbpower djs50. It is also known as a car jump starter because it is powered by an inbuilt battery. This kind of device has gained much popularity in the market. It is not very difficult to use one.